hand tools that are used in making coco lumber​

1. hand tools that are used in making coco lumber​

Answer:

•saw

•pliece(to shape the wood)

•brush

Explanation:

Sana po makatulong po yann

#KEEP ON LEARNING ❤️

2. The Ambahan scripts of mindoro are commonly written on coco lumber.​

Answer:

separate

Explanation:

ushsvdjjdhdjdj

3. compute for the board foot of 2"×3"×8' coco lumber​

Answer:

48

Explanation:

oo na alam ko yan to

4. ano ang kagamitan sa paggawa ng coco lumber?paki answer po ngayon please​

Answer:

Puno na nilinis at pinakintab

5. plot of the movie coco

Despite his family's generations-old ban on music, young Miguel dreams of becoming an accomplished musician like his idol Ernesto de la Cruz. Desperate to prove his talent, Miguel finds himself in the stunning and colorful Land of the Dead. After meeting a charming trickster named Héctor, the two new friends embark on an extraordinary journey to unlock the real story behind Miguel's family history.

6. what is the difference between sELECT lumber and common lumber​

Answer:

The difference between the two grades is the better face: When grading No. 1 Common, the better face is the same or better than the poorer face. When grading Select, the better face must grade FAS, which means that the better face of Select must be clearer than the better face of No. 1 Common.

Answer:

The difference between the two grades is the better face: When grading No. 1 Common, the better face is the same or better than the poorer face. When grading Select, the better face must grade FAS, which means that the better face of Select must be clearer than the better face of No. 1 Common.

7. What is the correct way of writing the scientific name of coconut? a. a. Cocos nucifera L. b. cocos nucifera L. c. Cocus.nucifera L. d. cocos nucifera L.

Letter A is the best answer among the choices.

But the correct way of writing a scientific name is making it italicized.

Cocos nucifera L.

8. classification of lumber ​

Answer:

There are two general categories of lumber: hardwoods and softwoods. Hardwood lumber is made from deciduous trees, whereas softwood lumber is made from coniferous trees. For example, Douglas fir lumber comes from a Douglas fir tree; walnut lumber comes from a walnut tree, and so forth.

Explanation:

Thats my answer. be Brainliest plsss

Answer:

two classifications of lumber?

There are two general categories of lumber: hardwoods and softwoods. Hardwood lumber is made from deciduous trees, whereas softwood lumber is made from coniferous trees.

Explanation:

Classification of Lumber

Trees are classified as either softwood or hardwood, as shown in Table 3. All lumber is therefore classified in the same way. The terms “softwood” and “hardwood” can be confusing since some softwood lumber is harder than some hardwood lumber. Generally, hardwoods are more dense and harder than softwoods. Lumber can be further classified by the name of the tree from which it comes. For example, Douglas fir lumber comes from a Douglas fir tree; walnut lumber comes from a walnut tree, and so forth.

9. the fuction of coco shell?​

function of coconut shell is his tree

10. Coco ___?A.MelonB.Martin​

Answer:

C.nut

Explanation:

pwede din D.all of the above

11. onjunctions can join: 1. Words Manny Pacquiao Coco Martin Manny Pacquaio or Coco Martin​

answer

cocomartin and manny paquaio

explaination

Kase ang galing ni coco Martin umakting

and manny paquaio is ang galing sumuntok

THANKS PA BRAINLIEST PO

12. Compute the total number of board foot in the given lumber whose dimensions are as follows: 1.5pcs 2"×2"×8' lumber 2.6pcs 2"×3"×10' lumber 3.7pcs 2"×4"×12' lumber 4.8pcs 3"×4"×10' lumber 5.9pcs 4"×4"×10' lumber​

Answer:

1.32

2.60

3.96

4.120

5.160

13. Exercise 2 Directions: Complete the 3 linear measurements and the 6 faces of lumber. LINEAR MEASUREMENTS FOR THE 6 FACES OF LUMBER 6 Fares of Lumber LY. 12 2. 1. 3. LONGE 4. A lumber has 6 laces: 5.-7.​

[tex] \underline{ \rm{Answer:}}[/tex]

#1.

Surface 1

#2.

Edge 2

#3.

Surface 2

#4.

End 1

#5.

A number has 6 faces: 2 ends and2 edges and 2 suface.

[tex] \\ [/tex]

Kindly refer the attached for understanding!!

[tex] \\ [/tex]

#CarryOnLearning

14. Gawain 3Panuto: Isulat sa papel ang titik nginilalarawan sa pangungus1. Dahil sa malapad na kapataganpangunahing produktong pang-aA. mais B. palay с. kape2. Alin sa mga sumusunod ang prA. coco lumber B. bunot​

Answer:

b.palay sa number 1

di ko po alam ang sagot sa number 2

15. Task Sheet No. 5 TLE IACP9-12BL-Ia-h-1 PROPERTIES OF WOOD DIRECTION: On a piece of paper enumerate five (5) local wood or lumber products and write down its common use in carpentry. Example: 1. Coco Lumber (type or name of lumber) - it is widely use as scaffolding (its use)​

Answer:

1. Balsa Wood

Balsa wood is used to make very light, stiff structures in model bridge tests and for the construction of light wooden airplanes

2. Bamboo

Bamboo can be used as a biofuel, food, and for architecture and construction applications

3. Basswood

Common Uses: Carvings, lumber, musical instruments (electric guitar bodies), veneer, plywood, and wood pulp and fiber products.

4. Beechwood

is often used in the making of furniture, cabinetry, cooking utensils, tool handles, plywood and sports equipment

5. Birch Wood

is often used to make cabinets, furniture and hardwood floors. It is also frequently used as a veneer due to its beautiful grain and color.

Explanation:

hope it helps:)

16. the toy balloons of coco

Answer :

Coco’s toy balloons

Yan lang po alam ko

17. What is the best lumber suited to make as scaffolding.A. soft lumber B. strong lumberC. lumber with knots D. lumber with dry rot​

A. soft lumber B. strong lumber

18. a lumber 12 meter long leans against the electric post if the foot of the lumber makes an angle of 75° with the ground how far is the base of the lumber from the electric post​

[tex] \large\underline \mathcal{{QUESTION:}}[/tex]

a lumber 12 meter long leans against the electric post if the foot of the lumber makes an angle of 75° with the ground how far is the base of the lumber from the electric post

[tex] \\ [/tex]

[tex] \large\underline \mathcal{{SOLUTION:}}[/tex]

We will use the trigonometric ratio CAH

Where: Adjacent = x and Hypothenus = 12

[tex] \\ [/tex]

Solving:

Cos (75°) = X / 12Cos (75°) × 12 = X0.2588 × 12 = X3.1056 or 3.11 = X

[tex] \\ [/tex]

[tex] \large\underline \mathcal{{ANSWER:}}[/tex]

3.11 meters

[tex] \\ \\ [/tex]

note that the answer is rounded in the nearest hundredths

19. Which is the best materials that can be used as Chick guard?A. wire mesh. C. banana bracts B. coco leaves. D. coco lumberpa help po plss..​

Answer:

B.coco lraves

Explanation:

pwede po yan promise

Answer:

Coco leaves

Explanation:

I hope it's help

But if i'm wrong sorry

20. coco yam modifications​

Answer:

Tulog kana.

Explanation:

Keep learning on brainly

21. Pre-testTrue or False:Directions: Write T if the statement is correct and F if it is incorrect.1. In measuring of stocks, accurate measurement is necessary.2. The graduation of measuring tools should always be touched to have accurate measurement.3. In locating the middle of the board, the rule should be laid on with at angle, so that the major measurementcan easily be located.4. In faces of a lumber EF is the edge of stock.5. In faces of a lumber AB is the length of stock.6. Scriber of a marking gauge is not important.7. In using marking gauge, coco lumber is the right lumber to be used.8. Marking gauge is used for measuring and marking purposes.9. Adjusting screw is used for loosening and tightening the gauge.10. Do you agree that marking gauge is important in carpentry works?​

Answer:

1. F

2. T

3. F

4. T

5. T

6.F

7. T

8. T

9. T

10.T

Explanation:

I hope it's helps

22. what are the uses of lumber in constructing a house with quality of lumber is being used​

The words ‘lumber’ and ‘timber’ are often used to refer to wood used specifically in construction work, however there is debate as to which terms should apply to different scenarios. As a rule of thumb, wood which is smaller than five inches wide by five inches thick is referred to as lumber. These pieces are usually machine-planed and sawn for certain dimensions primarily being used in residential construction.

23. coco martin filipino​

Answer:

#AbsCbnWashoutdown

#BabyeCardoDalisay

#ProvinceBoy

24. 1. 1" thick walnut 6" wide 14” long: cost of $25.50 per foot2. 12" thick maple 8" wide and 72" long: cost of 20.00 per foot.3. 2" thick coco lumber 2” wide and 72 ": cost of 4.00 per foot.4. 1" thick fly wood 4” wide and 96 ": cost of $35.00 per foot.5. 4" thick good lumber 4” wide and10': cost 40.00 per foot.​

Answer:

1 x 1 = 1 divide by alpha x 23 x 1849270 x c -x a n trolp

25. why physical inspection of the lumber is significant buying a lumber? paki sagot po pleaseee​

Answer:

CONTROL ISSUES TO CHECK WHEN BUYING LUMBER

Posted by Tom Laurenzi on Jan 9, 2018 8:26:00 AM

Share

Buying lumberIf you’re buying raw lumber for processing into other products, there are a number of quality related issues to check for. These issues can heavily impact your ability to use the lumber for whatever purpose you have in mind.

What are some of the critical quality control issues to check for when buying lumber? And, how can you best inspect lumber for these issues?

Some big quality issues to look out for when purchasing lumber include:

1: Chemicals and Additives

Back in early 2016, it was found that some lumber sourced from China was being preserved with formaldehyde. The chemical additive was so concentrated in this lumber that, according to CDC reports cited by USA Today, the estimated risk of it causing cancer was “six to 30 cases per 100,000 people.” In addition to the cancer risk, “people exposed to the flooring are also susceptible to increased risks of exacerbated respiratory issues such as asthma and eye, nose and throat irritation.”

This story highlights the problem with some lumber supplies: the use of potentially dangerous chemicals as additives. While there are many cases where using some chemicals to preserve lumber or enhance its qualities is safe, the use of the wrong chemicals can impair the quality of the wood or even pose a danger to people.

To avoid this issue, it’s generally best to work with reputable lumber sellers and ask what chemicals were used in the processing of the lumber. Trying to test for every kind of chemical additive would be cost prohibitive and take too much time.

2: Wood Rot

Another common issue with natural, untreated lumber is that it may be subject to wood rot. This can weaken wood, cause unpleasant odors, and make the lumber unsuitable for your needs.

Wood rot commonly occurs because of excess moisture. Wet wood becomes a feeding ground for bacteria and fungi to grow and rot the wood from the inside out.

One of the best ways to identify whether or not wood is at risk of developing rot is to check it with a moisture meter prior to purchasing it. With a moisture meter, you can get an accurate moisture content measurement of the lumber you’re about to purchase at that precise moment—which can be invaluable for determining the risk of wood rot.

3: Splitting Wood

On the extreme opposite end of the spectrum from wood that is too wet and may rot is wood that has been over dried and is likely to split or crack because of it. As wood fibers lose moisture, they may contract. And, in some severe cases, this can cause the wood to form cracks and splits.

Explanation:

I hope it's help. I'm answers your questions and now answer my question plssss

26. what are the two important dimensions of lumber you need to know in classifying the lumbers?​

Answer:

Lumber, also known as timber, is a type of wood that has been processed into beams and planks, a stage in the process of wood production. Lumber is mainly used for structural purposes but has many other uses as well.

Explanation:

I hope it will help

27. MGA PRODUKTONG GALING SA PUNO NG NIYOG1.coconut oil2.shampoo3.sabon4.bao5.pabangoMGA PRODUKTONG MULA SA BUNGA NG NIYOG1.coco lumber2.walis tingting3.sombrero4.bayong5.bunot​

Answer:

the mas from the space cane from the sun and unnivera

28. identify the hand tools that can be used in creative products made or out of coco lumber?​

Answer:

One of primary uses of coconut timber is for building construction. Coconut timber is suitable for housing components like trusses, purlins, walls, joists, doors, window frames and jalousies. Low density coconut wood materials (from the centre of the stem) should be used only in non-load structures like walls and panels while high density coconut wood (from the perimeter of the stem) can be used for load-bearing structures like trusses and joints. Table 6 could serve as a guide for prospective users of coconut timber for building construction. Table 7 lists the different coconut timber derived products and the recommended characteristics of raw materials to use.

The small diameter of coconut stem limits the size of sawn lumber, hence the optimum width and thickness of boards that are usually recovered are 25mm and 50mm, respectively. For structures requiring bigger sizes of lumber, glued lamination of the wood to the desired dimensions solves this particular problem.

High density coconut wood could also be used as posts, power and telecommunication poles, trusses, floor tiles (parquet), girts, floor joists, purlins, balustrades and railings and other load bearing structures. When coconut logs are to be used in ground contact under exposed conditions (e.g. as posts or as poles for electrical wires) they must be properly treated.

Medium density boards can be effectively used for walling, horizontal studs, ceiling joists and door/window frames. As a rule, coconut wood with density below 400 kg/m3 should not be used as structural framing materials. However, they can be used in the internal parts of a building as ceiling and wall lining in the form of boards and shingles. A problem related to structural application of cocowood is the difficulty of nailing and subsequently splitting of high density wood finishes.

Explanation:

29. Fact: CoCo Martin is​

Answer:

Coco Martin is a Filipino everyman. In person, he's shorter than you'd expect. Disarming; he's also trim, handsome (but not too handsome) with an empathetic smile and warm eyes. When you meet him, he's immediately familiar.

Answer:Fact about Coco Martin

Coco or born as Rodel Nacianceno was dubbed as "The King of Philippine Independent Films." Coco was born on November 1, 1981 in Manila, Philippines. He is living with his grandmother whom he considers as his second mother. He has five siblings in total both from his biological parents.

Hope it helps✨✨

#Carry on Learning

30. 7. Which of the following materials is the most economical to use for the posts of achicken house?a. Cement postb. Coco lumberc. Good lumberd. Ipil-ipil or madre de cacao​

Answer:

LETTER D PO

Explanation:

IPIL IPIL OR MADRE DE CACAO

Answer:

d is a correct answer

Explanation:

thanks me later