Simple curve compound curve reverse curve formula
1. Simple curve compound curve reverse curve formula
Answer:
I think yan yung answer
Explanation:
sorry kung mali :'>2. compound curves sample problem
Answer:
A compound curve consists of two (or more) circular curves between two main tangents joined at point of compound curve (PCC). Curve at PC is designated as 1 (R1, L1, T1, etc) and curve at PT is designated as 2 (R2, L2, T2, etc).
3. Further____ provides____ to the compound microscope while the ____ is curved shape used for holding the compound microscope when transporting.
Answer:
Further, Base provides stability to the compound microscope while the arm is curved shape used for holding the compound microscope when transporting. The inclination joint supports the compound microscope when it is in inclined position.
4. Exercise 1: Multiple Choices. Read each item carefully and write the letter that corresponds to your answer. 1. Which of the following does not undergo any change in computing for simple interest? a. maturity value b. principal c. period d. interest 2. Using the characteristics of both simple and compound interest on accounts with the same interest rate (1) and time (t) which of the following statements is correctly stated? a. Borrowers are benefited by simple interest whereas lender benefited in compound interest. b. Lenders are benefited by simple interest whereas borrowers benefited in compound interest. c. Computing for compound interest is comparatively easy than its . counterpart d. Computing for simple interest requires complicated process because of its changing principal. 3. Which of the following can described the flow of graph of compound interest? a. straight line b. parabolic line c. broken line d. curve line 4. To eam as much interest as possible, you should open a savings account that earns interest and has the interest rate. a. compound, lowest C. simple, lowest b. compound; highest d. simple; highest 5. The younger you are when you invest in an account with compounded interest, the younger you are likely to retire. a. sometimes true b. maybe true c. always true d. never truehelp pls
Answer:
1.b2.a3.d4.b5.cExplanation:
sorry f may mali,kindly heart this
#Carryonlearning
5. 1. A compound curve has the following data: 11 = 28° D = 30 Iz = 31° D2 = 4° STA P.I. 30 + 120.5 Find the stationing of P.C.C. Use P.I. 30 + 120.5 A. 30 + 110.73 C. 30 + 114.88 B. 30 + 118.46 D. 30 + 106.97
Answer:
a .
d. this is tge answee
6. AOYMPI is a condition in which light rays focus in front of the eye's retina instead ofon the retina.Among the applications in which convex lenses are used is found in compoundROCOESPMCSI.If both sides of the lens are curved inward, then that type of convex lens is calledCNBEOVIX typically seen in magnifying glasses.If only one side of the lens is curved inward and the other has a flat surface, it iscalled as ANOCXPENLVO.The farther the object from the lens, the shorter the distance the light beamsERVOGCENnple Electric Motor and Generator: Choose the best answer from the choices in the parenthesis. Underline the an
Answer:
MYOPIA
MICROSCOPES
BICONVEX
PLANOCONVEX
CONVERGE
MYOPIA is a condition in which light rays focus in front of the eye's retina instead of
on the retina. Among the applications in which convex lenses are used is found in compound
MICROSCOPES. If both sides of the lens are curved inward, then that type of convex lens is called BICONVEX typically seen in magnifying glasses. If only one side of the lens is curved inward and the other has a flat surface, it is
called as PLANOCONVEX.
The farther the object from the lens, the shorter the distance the light beams
CONVERGE.
7. 3. It is the point below the curve which s more solute.A. CompoundC. SaturatedB. MixtureD. Unsaturatedoriginal
Answer:
C. Saturated
Explanation:that the answer
8. Directions: Select your answer(s) from the box below Write your answer in yourScience Answer Sheetarm@yoplececontrolsFine adjustment knobinclination Jointsupportsbaseobjectivesdraw tubemirrorThe compound microscope is classified into three main parts: Mechanical,Illuminating and Magnifying. The mechanical part comprises of 1)____whichholds the objectives and revolving nosepiece in place. The coarse adjustment knoballows the movement of the tube upward or downward. On the other hand, the2)______brings the specimen into sharp focus.In addition, the stage and stage clips 3)_______and holds the specimen in place.Further, 4)_______provides 5)_______to the compound microscope while theis curved shape used for holding the compound microscope whentransporting The 7).______ supports the compound microscope when it is in inclinedpositionThe illuminating part consists of the 8) ______which allows light to pass throughthe diaphragm and that 9)_____the amount of light. Further, the magnifying partcomprises of the10)______which is a lens that attaches to a body tube. Thespecimens are magnified by the 11)______which are classified into Scanner, lowpower objective, high power objective and oil immersion.
Answer:
Click the attached photo for the answers.
9. WORD BOX arm mirror diaphragm eyepiece fine base body tube inclination joint objectives microscope stage The compound microscope consists of three main parts: mechanical, illuminating, and magnifying parts. Its mechanical parts provide support to all other parts of the microscope. The 1 holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the 2 brings the specimen into sharp focus. The and stage clips support and hold the specimen in place 4 The provides support to the compound microscope while the curve-shaped is used for holding the microscope when transportinfy. The supports the compound microscope when it is in an inclined position. 8 The illuminating part consists of the 7 which allows light to pass through the and controls the amount of light. The magnifying part includes the which is a lens attached to a body tube. The specimens are magnified by the which are classified into Scanner, Low Power Objective (LPO), High Power Objective (HPO), and Oil immersion.
Answer:
Parts and functions of a compound microscope
1. Parts and Functions of a Compound Microscope
2. Light Microscope • Simple – uses a single lens • Compound – uses a set of lenses or lens systems
3. Simple Light Microscope
4. Compound Microscope • Mechanical Parts – Used to support and adjust the parts • Magnifying Parts – Used to enlarge the specimen • Illuminating Parts – Used to provide light
5. Mechanical Parts • Base – Bottommost portion that supports the entire/lower microscope • Pillar – Part above the base that supports the other parts • Inclination Joint – Allows for tilting of the microscope for convenience of the user
6. Inclination Joint Pillar Base
7. • Arm/Neck –Curved/slanted part which is held while carrying the microscope • Stage –Platform where object to be examined is placed • Stage Clips –Secures the specimen to the stage
8. • Stage Opening • Body Tube –Attached to the arm and bears the lenses • Draw Tube –Cylindrical structure on top of the body tube that holds the ocular lenses
9. Draw Tube Body Tube Arm / Neck Stage
10. • Revolving/Rotating Nosepiece –Rotating disc where the objectives are attached • Dust Shield –Lies atop the nosepiece and keeps dust from settling on the objectives
11. Dust Shield Revolving Nosepiece
12. • Coarse Adjustment Knob –Geared to the body tube which elevates or lowers when rotated bringing the object into approximate focus • Fine Adjustment Knob –A smaller knob for delicate focusing bringing the object into perfect focus
13. Coarse Adjustment Knob Fine Adjustment Knob
14. • Condenser Adjustment Knob –Elevates and lowers the condenser to regulate the intensity of light • Iris Diaphragm Lever –Lever in front of the condenser and which is moved horizontally to open/close the diaphragm
15. Iris Diaphragm Lever Condenser Adjustment Knob
16. Illuminating Parts • Mirror – Located beneath the stage and has concave and plane surfaces to gather and direct light in order to illuminate the object • Electric Lamp – A built-in illuminator beneath the stage that may eb used if sunlight is not preferred or is not available
17. Mirror / Electric Lamp
18. • Substage – Iris Diaphragm • Regualtes the amount of light necesaary to obtain a clearer view of the object – Condenser • A set of lenses between the mirror and the stage that concentrates light rays on the specimen.
19. Iris Diaphragm Condenser
20. MAGNIFYING PARTS • Ocular / Eyepiece – Another set of lens found on top of the body tube which functions to further magnify the image produced by the objective lenses. It usually ranges from 5x to 15x.
21. Ocular
22. MAGNIFYING PARTS • Objectives – Metal cylinders attached below the nosepiece and contains especially ground and polished lenses • LPO / Low Power Objective – Gives the lowest magnification, usually 10x • HPO / High Power Objective – Gives higher magnification usually 40x or 43x • OIO / Oil Immersion Objective – Gives the highest magnification, usually 97x or 100x, and is used wet either with cedar wood oil or synthetic oil
23. Objectives
24. Use of the Compound Microscope
25. • Make sure all backpacks are out of the aisles before you get a microscope! • Always carry the microscope with one hand on the Arm and one hand on the Base. Carry it close to your body.
26. • Be gentle. • Setting the microscope down on the table roughly could jar lenses and other parts loose.
27. • Always start and end with lowest powered objective.
28. • Place the slide on the microscope stage, with the specimen directly over the center of the glass circle on the stage (directly over the light).
29. • If you wear glasses, take them off; if you see only your eyelashes, move closer. • If you see a dark line that goes part way across the field of view, try turning the eyepiece.
Explanation:
pa brainest please
10. Directions: Select your answers) from the box below. Write your answer in your Scienceactivity notebookpagpipilian: (controls)(Fine adjustment knob)(eyepiece)(objectives)(draw tube)(inclination joint)(supports)(mirror)(arm)(base)The compound microscope is classified into three main parts: Mechanical, illuminatingand Magnifying. The mechanical part comprises of_________which holds the objectives andrevolving nosepiece in place. The coarse adjustment knob allows the movement of the tubeupward or downward. On the other hand, the________ brings the specimen into sharp focusIn addition, the stage and stage clips_________and holds the specimen in placeFurther,__________provides_________ to the compound microscope while the__________is curvedshape used for holding the compound microscope when transporting. The________supports thecompound microscope when it is in inclined position.The illuminating part consists of the__________ which allows light to pass through thediaphragm and that________ the amount of light. Further, the magnifying part comprises of the__________which is a lens that attaches to a body tube. The specimens are magnified by the________which are classified into Scanner, low power objective, high power objective and oilimmersion.please, i need your answer, i really need it . thank you
Answer:
1. Draw tube
2. Fine adjustment knob
3. Supports
4. Mirror
5. Controls
6. Eyepiece
7. Objectives
8. Base
9. Arm
10. Inclination joint
Explanation:
So yun po Sana makatulong
11. the compound microscope consist of three main parts: mechanical,illuminating,and magnifying parts.the _______holds the objectives and revolving upnosepiece in place the course adjustment knob allows the movement of the tube upward or downward on other hand,the _______brings the speciman into sharp focus.both the draw tube and the fine adjustment knob are mechanical parts of the microscope.also,the ________and stage clips support and hold the speciman in place.further,the ________provides support to the compound microscope while the curved shaped ________is used for holding the compound microscope when transporting the _________support the compound microscope when it is an inclined position.the illuminating part which consists of light________allows light to pass through the________and controls the amount of light further the magnifying parts include the _________which is a lens attached to a body tube the specimens are magnified by the_________which are classified into scanner low power objective(LPO) high power objective(HPO)and oil immersion.
Answer:
the compound microscope consist of three main parts: mechanical,illuminating,and magnifying parts.the body tube holds the objectives and revolving upnosepiece in place the course adjustment knob allows the movement of the tube upward or downward on other hand,the fine adjustment knob brings the speciman into sharp focus.both the draw tube and the fine adjustment knob are mechanical parts of the microscope.
also,the stage and stage clips support and hold the speciman in place.further,the base provides support to the compound microscope while the curved shaped arm is used for holding the compound microscope when transporting the inclination joint support the compound microscope when it is an inclined position. the illuminating part which consists of light mirror allows light to pass through the adjust and controls the amount of light further the magnifying parts include the objective lenses which is a lens attached to a body tube the specimens are magnified by the eyepiece which are classified into scanner low power objective(LPO) high power objective(HPO)and oil immersion.
----------------------------»Gliterss7712. Directions: Select your answer(s) from the box below. Write your answer youactivity notebook.controlsFine adjustment knobsyspieceobjectivesinclination jointdraw tubesupportsmirrorThe compound microscope is classified into three main parts: Mechanica, mingingand Magnifying. The mechanical part comprises ofwhich holds the objectivesrevolving nose piece in place. The coarse adjustment knob allows the movement of the tubeupward or downward. On the other hand, thebrings the specimen into sharp focusIn addition, the stage and stage clipsand holds the specimen in place,Further,provides to the compound microscope while theis curvedshape used for holding the compound microscope when transporting. The supports thecompound microscope when it is in inclined position.The illuminating part consists of the which allows light to pass through thediaphragm and that the amount of light. Further, the magnifying part comprises of thewhich is a lens that attaches to a body tube. The specimens are magnified by thewhich are classified into Scanner, low power objective, high power objective and oimmersion.
Like they said though
You can take a man out the hood
But you can't take the hood out the man
Mga kababayan, turn up!
Tayo'y Pilipino
Kahit anong kulay ng balat, isasapuso
Mapa-Tagalog, Bisaya, o Ilokano
Walang tatalo sa bagsik ng ating dugo
Isigaw ng malakas ang ating panalo
'Wag nang pagusapan ang mga negatibong pangyayari
Sa'n mang panig ka nasa mundo
Kinabukasan na natin 'to, panalo!
Yeah
Keep runnin' ya mouth when you lyin'
I stay on my business while watchin' you dyin'
I'm takin' my people to heights while you cryin'
'Bout regular livin' & that's what I'm tryna prove
'Stead of just lyin' in booths
First true Filipino rapper on the news
Sit, enjoy it if ya' cool
Haters can snooze
While I put my city on the map
22-double the Olongapo City no cap
Never forgettin' the street where my cousin would sit
When we always just listen to rap
Kendrick, Em, & A$AP with some metal
And man we would turn up with that
Been mundane till the sun came
Now I want fame like a kid in the trap uh
Aye
I been in Spain (Spain)
But the letter 'S' is silent (pain)
I'm claimin' my reign like a king
So I can water crops for survivin' (rain rain)
Go away if you trippin' (yuh)
Had a homie he was crippin' (cuh)
Ain't got no love for the people
Who talk over songs when they
Claimin' they listen (listen listen)
These bars never done, uh
3 stars and a sun, aye
Blue, red draped down on a flag
No we never fear none
Most of us didn't grow up with a trust fund
Know that I'm willin' to kill for a loved one
I'm on the move from a nothin' to someone
Reminding my people to shout
Tayo'y Pilipino
Kahit anong kulay ng balat isasapuso
Mapa-Tagalog, Bisaya, o Ilokano
Walang tatalo sa bagsik ng ating dugo
Isigaw ng malakas ang ating panalo
'Wag nang pagusapan ang mga negatibong pangyayari
Sa'n mang panig ka nasa mundo
Kinabukasan na natin 'to ('lam mo na)
(Woo!) panalo!
Aye
Huh, aye
Kung inakala mong isang lenggwahe lang kayang gamitin ni Ez Mil
'La kang mapapala kung ganyan ka magisip
Kay Bathala ka sisingil
Utang na galing sa loob na lumutang
Hinain sa turon na may pusang sinaing sa-
(Mag-ilokano ka tol!) ano?
(Ilokano, Ilokano) okay!
Uray no nga imbagak kinyayo ti ukkinayo
Dittoy ak laeng ag-ururay no sinnobti agdayo
Tapno eh sang sangitam ak inte wagas mo nga payo
Ngata kay-kayatem nga patayeng ka ken atoy bayo
Sikayo nga am-amin
Lahat kayo
All of you
Ever since bata ako I've been kinda
Discriminated in my own home country
Sure, some would be like:
"Luh ang puti puti mo, tisoy"
I ain't tisoy, I'm Pinoy
And I swear that:
Nobody will ever look at me the same way again
I'll make it to the top while I be showin'
Nay-sayers and
Nanalo na ako nung una pa na pinugutan si Lapu sa Mactan
At lahat ang nasaktan na nalaman nila na pinatay
Ang kanilang bayani sa karagatan ng bansa na pag-aari ng Pilipino
Despite any termoil
I'll be proud of my soil
Bakit?
Kase
Tayo'y Pilipino
Kahit anong kulay ng balat, isasapuso
Mapa-Tagalog, Bisaya, o Ilokano
Walang tatalo sa bagsik ng ating dugo
Isigaw ng malakas ang ating panalo
'Wag nang pagusapan ang mga negatibong pangyayari
Sa'n mang panig ka nasa mundo
Kinabukasan na natin 'to, panalo!
13. Activity no. 1 Complete me. Select your answer(s) from the box below. Write your answer in the space provided controls Fine adjustment knob arm eyepiece objectives inclination Joint base draw tube supports mirror The compound microscope is classified into three main parts. Mechanical, Illuminating and Magnifying. The mechanical part comprises of (1) which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the (2) brings the specimen into sharp focus In addition, the stage and stage clips (3) and holds the specimen in place. Further, (4) provides (5) to the compound microscope while the (6) is curved shape used for holding the compound microscope when transporting. The (7) supports the compound microscope when it is in inclined position The illuminating part consists of the (8) which allows light to pass.pasagot po please need ko po
Parts of the Microscope
Answer:
The compound microscope is classified into three main parts. Mechanical, illuminating, and magnifying. The mechanical part comprises of (1) draw tube which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the (2) fine adjustment knob brings the specimen into sharper focus. In addition, the stage and stage clips (3) controls and holds the specimen in place. Further, (4) base provides (5) support to the compound microscope while the (6) arm is curved shape used for holding the compound microscope when transporting. The (7) inclination joint supports the compound microscope when it is in inclined position. The illuminating part consists of the (8) mirror which allows light to pass.
Explanation:
Viewing microscopic objects is made possible because of the invention of the microscope. It allows us to observe microscopic objects that are not seen by the naked eye. In fact, several discoveries and additional knowledge have been added because of the microscope.
Magnifying Parts:
The microscope contains the eyepiece and objectives. These parts have lenses that help in magnifying objects or specimen being viewed. The magnifying capacity of these parts vary and this can be usually engraved on the part.
Illuminating Parts
The mirror or light source provides light that allows us to see the specimen we are trying to view and examine. The mirror gathers light from the light source to direct it to the specimen being viewed. The condenser focuses light entering. They collect the light and direct it to the specimen.
Mechanical Parts
For support, there is the base, arm, body tube, stage, and stage clips. The coarse adjustment knob and fine adjustment knob focus and sharpen the image viewed. The nosepiece is connected to the body tube and moves or shifts from one objectives lens to another objective. The diaphragm controls the amount of light reaching the specimen. Also, the inclination joint helps in adjusting the tilt of the microscope. These parts all help in the function of the microscope which to magnify and view microscopic objects.
#BRAINLYFAST
14. Direction: Fill in the blanks. Look down below for the missing words in the paragraph below it. •controls•objectives •draw tube •Fine adjustment knob •inclination joint•supports•arm•base•mirror•eyepiece the compound microscope is classified into three main parts: mechanical, illuminating and magnifying.the mechanical part comprises of _________ which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. on the other hand, the_________ brings the specimen into sharp focus. In addition the stage and stage clips_________ and holds the specimen and place. Further,_________provides________to the compound microscope while the_________is curved shape used for holding the compound microscope when transporting. The_________supports the compound microscope when it is in inclined position. The illuminating part consists of the_________which allows light to pass through the diaphragm and that_________ the amount of light. Further, the magnifying part comprises of the_________which is a lens that attaches to a body tube. The specimens are magnified by the_________which are classified into Scanner, low power objective, high power objective and oil immersion.
1.body tube
2.secure
3.base
4.arm
5. Mirror
6. Adjust
7. Objective
8. Eyepiece or ocular
Hope can help
15. Math:1. How can we described the graph of compound interest?a. broken line b. curve line c. parabolic line d. straight line2. What will be the maturity value of PHP 12,000 investedfor 4 years at 15% compounded quarterly?a. PHP 15,783.25 b. PHP 17,923.50C. PHP 20,125.18 d. PHP 21, 626.733. Using the characteristics of both simple and compoundinterest on accounts with the same interest rate andtime (7) which of the following statement is correctlystated?a. Computing for simple interest requires complicatedprocess because of its changing principal.b. Lenders are benefited by simple interest whereasborrowers benefited in compound interest.C. Computing for compound interest is comparatively easythan its counterpart.d. Borrowers are benefited by simple interest whereaslender benefited in compound interest.4. How much final amount would Phoebe receive if sheinvests PHP 60,500 for 2 years at 5% simple interest?a. PHP 6,050 b. PHP 60,500 C. PHP 66,550 d. PHP 69,0005. To earn as much interest as possible, you should open asavings account that earns interest and has theinterest rate.a. compound; lowestC. simple; lowestb. compound; highestd. simple; highest6. How much interest was paid by Marisa on PHP 24,000that she borrowed for 4 years at 8% simple interest?a. PHP 7,680 b. PHP 7,860 C. PHP 8,760 d. PHP 8,8807. What will be the final value of the PHP 20,000investment of Carmie if it accumulated an interest of PHP6,500 in 8 years?a. PHP 20,600b. PHP 26,500C. PHP 27,500d. PHP 29,7008. Ziphora invested PHP 16,000 at 13% compoundedannually. At the end of 15 years, what is the compoundinterest?a. PHP 254,860.51 b. PHP 574,279.18C. PHP 840,683.26 d. PHP 870,175.85AFE and d
Answer:
1.d
2.a
3.a
Step-by-step explanation:
d kona po alam
16. In addition ,the stage and stage clips _____and holds the specimen inplace.Further ____provides ____to the compound microscope when _____is curved shape used for holding the compound microscope when transporting. The ______supports the compound microscope when it is in inclined position
Answer:
1.golgie___
2.and___
3holds.___
4.compuond___
5.microscope___
Explanation:
I THINK ITS HELP
17. G in compound curve layout where common tangent is not parallel to the long chord, how do we compute for the long chord from pc to pt
Answer:
G imG in compound curve layout where common tangent is not parallel to the long chord, how do we compute for the long chord from pc to pt
18. The compound microscope is classified into three main parts: Mechanical, Illuminating and Magnifying. The mechanical part comprises of 1. which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the 2.______ brings the specimen into sharp focus. In addition, the stage and stage clips 3._______ and holds the specimen in place. Further, 4._______ provides 5.______ to the compound microscope while the 6. _______ is curved shape used for holding the compound microscope when transporting. The 7._____ supports the compound microscope when it is in inclined position. The illuminating part consists of the 8.______ which allows light to pass through the diaphragm and that 9.______ the amount of light. Further, the magnifying part comprises of the 10._____ which is a lens that attaches to a body tube. The specimens are magnified by the 11.______ which are classified into Scanner, low power objective, high power objective and oil immersion.
Answer:
Explanation:
19. Direction: Select your answer(s) from the words below.The compound microscope is classified into three main parts: Mechanical, Illuminating and Magnifying. The mechanical part comprises of ________ which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the ________ arm brings the specimen into sharp focus. In addition, the stage and stage clips _______ and holds the specimen in place. Further, provides ______ to the compound microscope while the ______ is curved shape used for holding the compound microscope when transporting. The ______ supports the compound microscope when it is in inclined position. the illuminating part consists of the ______ which allows light to pass through the diaphragm and that ______ the amount of light. Further, the magnifying part comprises of the _____ which is a lens that attaches to a body tube. The specimens are magnified by the _____ which are classified into Scanner, low power objective, high power objective, and oil immersion.________________________|controls, fine adjustment knob||eyepiece, objectives, base ||inclination joint, draw tube ||mirror, supports |￣￣￣￣￣￣￣￣￣￣￣￣￣
Answer:
(a) draw tube
(b) fine adjustment knob
(c) supports
(d) base
(e) supports
(f) arm
(g) inclination joint
(h) mirror
(i)control
(j)eyepiece
20. activity notebook. WORD BOX arm mirror dlaphragm eyepiece fine base body tube Inclination joint objectives microscope stage 1 2 The compound microscope consists of three main parts: mechanical, illuminating, and magnifying parts. Its mechanical parts provide support to all other parts of the microscope. The holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the brings the specimen into sharp focus. The 3 and stage clips support and hold the specimen in place. The 4 provides support to the compound microscope while the curve-shaped 5 is used for holding the microscope when transporting. The 6 supports the compound microscope when it is in an inclined position. The illuminating part consists of the 7 which allows light to pass through the 8 and controls the amount of light. The magnifying part includes the 9 which is a lens attached to a body tube. The specimens are magnified by the 10 which are classified into Scanner, Low Power Objective (LPO), High Power Objective (HPO), and Oil immersion.
Answer:
1. body tube
2. fine adjustment knob
3. stage
4. base
5. arm
6. inclination joint
7. mirror
8. diaphraghm
9. eyepiece
10. objectives
21. 6. It is composed of a cylindrical body with a spiral ridge called thread.a. Wedge b. screw c. fixed pulley7.is a grooved wheel that turns around an axle which is held in place by a mounting bracket.Inclined plane b. pulleyc. load8. It is a straight curved rigid bar that is free to turn about a fixed point.Wedge b. lever c. pulley9. Pencil sharpeners and meet grinders are examples of wheel and axle?a. Nob. Yes10. A moves along the rope or wire.a Compound pulley b. movable pulley c. fixed pulley
#BrainlyFast
6. It is composed of a cylindrical body with a spiral ridge called thread.
a. Wedge b. screw c. fixed pulley
7. is a grooved wheel that turns around an axle which is held in place by a mounting bracket.
a. Inclined plane b. pulley c. load
8. It is a straight curved rigid bar that is free to turn about a fixed point.
a. Wedge b. lever c. pulley
9. Pencil sharpeners and meet grinders are examples of wheel and axle?
a. No
b. Yes
10. A moves along the rope or wire.
a Compound pulley b. movable pulley c. fixed pulley
Kindly visit the link below:
brainly.ph/question/14184288
22. The long chord of a compound curve measures 135.0 metes and the angles it makes with the tangents are 18° and 15°, respectively. (a) Compute for the radii of the compound curve when the common tangent is parallel to the long chord. (b) If the station at A is 42+015.10, what is the station at PT?
[tex]\mathbb{SOLUTION:}[/tex]
Refer to the figures (Note: The figure is NTS)
[tex]\\[/tex]
a. Raddi of the compound curve
Consider the triangle ABC formed by P.C., P.C.C, and P.T. (Figure 2)
[tex]\mathsf{\theta =180^\circ - 9^\circ - 7^\circ 30'}[/tex]
[tex]\mathsf{\theta=163^\circ30'}[/tex]
[tex]\\[/tex]
Using Law of Sines:
[tex]\mathsf{\dfrac{AC}{sin(7^\circ 30')}=\dfrac{135}{sin(163^\circ 30')}}[/tex]
[tex]\mathsf{AC=\dfrac{135sin(7^\circ 30')}{sin(163^\circ 30')}}[/tex]
[tex]\mathsf{AC=62.0425 \ m}[/tex]
[tex]\\[/tex]
[tex]\mathsf{\dfrac{BC}{sin(9^\circ)}=\dfrac{135}{sin(163^\circ 30')}}[/tex]
[tex]\mathsf{BC=\dfrac{135sin(9^\circ)}{sin(163^\circ 30')}}[/tex]
[tex]\mathsf{BC=74.3574 \ m}[/tex]
[tex]\\[/tex]
Solving for the radii of the compound curve using the formula for the length of cord:
[tex]\mathsf{L=2Rsin\left(\dfrac{I}{2}\right)}[/tex]
[tex]\mathsf{R=\dfrac{L}{2sin\left(\dfrac{I}{2}\right)}}[/tex]
[tex]\\[/tex]
For the radius of the first curve (Figure 3),
[tex]\mathsf{R_1=\dfrac{AC}{2sin\left(\dfrac{I_1}{2}\right)}}[/tex]
[tex]\mathsf{R_1=\dfrac{62.0425}{2sin(9^\circ)}}[/tex]
[tex]\mathsf{R_1=198.3019 \ m}[/tex]
[tex]\\[/tex]
For the radius of the second curve (Figure 4),
[tex]\mathsf{R_2=\dfrac{BC}{2sin\left(\dfrac{I_2}{2}\right)}}[/tex]
[tex]\mathsf{R_2=\dfrac{74.3574}{2sin(7^\circ 30')}}[/tex]
[tex]\mathsf{R_2=284.8371 \ m}[/tex]
[tex]\\[/tex]
b. Station of P.T.,
(From the second image na galing sa chegg, assume ko nalang na yun yung tinutukoy mong point A)
[tex]\\[/tex]
Using the formula for length of tangent of curve:
[tex]\mathsf{T=R\:tan\left(\dfrac{I}{2}\right)}[/tex]
[tex]\\[/tex]
For the length of the tangent of the first curve,
[tex]\mathsf{T_1=R_1\:tan\left(\dfrac{I_1}{2}\right)}[/tex]
[tex]\mathsf{T_1=(198.3019)\:tan(9^\circ)}[/tex]
[tex]\mathsf{T_1=31.4079 \ m}[/tex]
[tex]\\[/tex]
For the length of curve of the first curve:
[tex]\mathsf{L_{C1}=\dfrac{R_1 I_1 \pi}{180^\circ}}[/tex]
[tex]\mathsf{L_{C1}=\dfrac{(198.3019)(18^\circ) \pi}{180^\circ}}[/tex]
[tex]\mathsf{L_{C1}=62.2984 \ m}[/tex]
[tex]\\[/tex]
For the length of curve of the second curve:
[tex]\mathsf{L_{C2}=\dfrac{R_2 I_2 \pi}{180^\circ}}[/tex]
[tex]\mathsf{L_{C2}=\dfrac{(284.8371)(15^\circ) \pi}{180^\circ}}[/tex]
[tex]\mathsf{L_{C2}=74.5702 \ m}[/tex]
[tex]\\[/tex]
The station of P.T. is:
[tex]\mathsf{Sta. \ P.T. = (Sta. \: A) - T_1 + L_{C1} + L_{C2}}[/tex]
[tex]\mathsf{Sta. \ P.T. = (42+015.10)-31.4079+62.2984+74.5702}[/tex]
[tex]\mathsf{Sta. \ P.T. = 42+120.5607}[/tex]
[tex]\\[/tex]
[tex]\mathbb{ANSWER:}[/tex]
a.) Radii of the compound curve:
[tex]\boxed{\mathsf{R_1=198.3019 \ m}}[/tex]
[tex]\boxed{\mathsf{R_2=284.8371 \ m}}[/tex]
b.) Station of P.T.:
[tex]\boxed{\mathsf{Sta. \ P.T. = 42+120.5607}}[/tex]
23. arm eyepiece controls objectives draw tube Fine adjustment knob inclination joint supports base mirror The compound microscope is classified into three main parts: Mechanical, Illuminating and Magnifying. The mechanical part comprises of which holds the objectives and revolving nose piece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the brings the specimen into sharp focus. In addition, the stage and stage clips and holds the specimen in place. Further, provides to the compound microscope while the is curved shape used for holding the compound microscope when transporting. The supports the compound microscope when it is in inclined position. The illuminating part consists of the which allows light to pass through the diaphragm and that the amount of light. Further, the magnifying part comprises of the which is a lens that attaches to a body tube. The specimens are magnified by the which are classified into Scanner, low power objective, high power objective and oil immersion
Answer:
1. Objectives
2. Eyepiece
3. Controls
4. Base
5. Supports
6. Arm
7. Inclination Joint
8. Mirror
9. Supports
10. Draw Tube
11. Fine Adjustment Knob
Explanation:
Objectives – refer to the cylindrical tubes attached to the revolving nosepiece for initial magnification of the image.Ocular / Eyepiece – a small tube consisting of lenses, that indicate the relative power of magnification.Controls – the place where a particular item is verified.Horseshoe base/base – the part that supports the entire microscope.Supports – a thing that bears the weight of something or keeps it upright.Arm – supports the body tube and primarily serves as a means for carrying the microscope.Inclination hinge or joint – the portion that allows tilting of the microscope at a desired angle .Mirror – reflects light rays through the object. One side of the mirror is plain (used with natural light); Mirror – reflects light rays through the object. One side of the mirror is plain (used with natural light); the other is concave (used with artificial light) .Draw tube – a small tube attached above the body tube wherein the ocular or the eyepiece is placed .Adjustments/Fine Adjustment Knob – the wheels that raise or lower the tube.24. . The common tangent AB of a compound curve is 164.72m with an azimuth from south of 282°31’. The vertex V being inaccessible. The azimuth from the south of the tangents AV and BV was measured to be 235°49’ and 170°81’, respectively. If the stationing of A is 43+980.25 and the degree of the first curve was fixed at 4°. Use arc basisdetermine the stationing of the PCdetermine the stationing of the PCCdetermine the stationing of PT
[tex]\mathbb{SOLUTION:}[/tex]
Refer to the attached figures
[tex]\\[/tex]
[tex]\mathsf{I_1=282^\circ 31' - 235^\circ 49'}[/tex]
[tex]\mathsf{I_1=46^\circ 42'}[/tex]
[tex]\mathsf{I_2=(170^\circ 81'-90^\circ)-(282^\circ 31' - 270^\circ)}[/tex]
[tex]\mathsf{I_2 = 68^\circ 50'}[/tex]
[tex]\\[/tex]
a.) Station of P.C.:
Using arc basis:
[tex]\mathsf{\dfrac{20}{D}=\dfrac{2\pi R}{360^\circ}}[/tex]
[tex]\mathsf{\dfrac{20}{D_1}=\dfrac{2 \pi R_1}{360^\circ}}[/tex]
[tex]\mathsf{\dfrac{20}{4^\circ}=\dfrac{2 \pi R_1}{360^\circ}}[/tex]
[tex]\mathsf{R_1=\dfrac{20(360^\circ)}{4^\circ(2\pi)}}[/tex]
[tex]\mathsf{R_1=286.479 \ m}[/tex]
[tex]\\[/tex]
[tex]\mathsf{T_1=R_1tan\left(\dfrac{I_1}{2}\right)}[/tex]
[tex]\mathsf{T_1=(286.479)tan\left(\dfrac{46^\circ 42'}{2}\right)}[/tex]
[tex]\mathsf{T_1=123.674 \ m}[/tex]
[tex]\\[/tex]
[tex]\mathsf{P.C. = A - T_1}[/tex]
[tex]\mathsf{P.C.=(43+980.25)-123.674}[/tex]
[tex]\mathsf{P.C.=43+856.576}[/tex]
[tex]\\[/tex]
b.) Station of P.C.C.:
Using the formula for the length of the curve in terms of the degree of curve:
[tex]\mathsf{L_{C1}=\dfrac{20 \ I_1}{D_1}}[/tex]
[tex]\mathsf{L_{C1}=\dfrac{20(46^\circ42')}{4^\circ}}[/tex]
[tex]\mathsf{L_{C1}=233.5 \ m}[/tex]
[tex]\\[/tex]
[tex]\mathsf{P.C.C.=P.C.+L_{C1}}[/tex]
[tex]\mathsf{P.C.C. = (43+856.576)+233.5}[/tex]
[tex]\mathsf{P.C.C.=44+90.076}[/tex]
[tex]\\[/tex]
c.) Station of P.T.:
[tex]\mathsf{T_1+T_2=164.72}[/tex]
[tex]\mathsf{T_2=164.72-T_1}[/tex]
[tex]\mathsf{T_2=164.72-123.674}[/tex]
[tex]\mathsf{T_2=41.046 \ m}[/tex]
[tex]\\[/tex]
[tex]\mathsf{T_2=R_2tan\left(\dfrac{I_2}{2}\right)}[/tex]
[tex]\mathsf{41.046=R_2tan\left(\dfrac{68^\circ 50'}{2}\right)}[/tex]
[tex]\mathsf{R_2=\dfrac{41.046}{tan\left(\dfrac{68^\circ 50'}{2}\right)}}[/tex]
[tex]\mathsf{R_2=59.909 \ m}[/tex]
[tex]\\[/tex]
Using arc basis:
[tex]\mathsf{\dfrac{20}{D_2}=\dfrac{2 \pi R_2}{360^\circ}}[/tex]
[tex]\mathsf{\dfrac{20}{D_2}=\dfrac{2\pi(59.909)}{360^\circ}}[/tex]
[tex]\mathsf{D_2=\dfrac{20(360^\circ)}{2 \pi (59.909)}}[/tex]
[tex]\mathsf{D_2=19^\circ 7' 39.37''}[/tex]
[tex]\\[/tex]
Using the formula for the length of the curve in terms of the degree of curve:
[tex]\mathsf{L_{C2}=\dfrac{20I_2}{D_2}}[/tex]
[tex]\mathsf{L_{C2}=\dfrac{20(68^\circ 50')}{19^\circ7'39.37''}}[/tex]
[tex]\mathsf{L_{C2}=97.973}[/tex]
[tex]\\[/tex]
[tex]\mathsf{P.T.=P.C.C. + L_{C2}}[/tex]
[tex]\mathsf{P.T.=(44+90.076)+97.973}[/tex]
[tex]\mathsf{P.T.=44+188.049}[/tex]
[tex]\\[/tex]
[tex]\mathbb{ANSWER:}[/tex]
a.) Station of P.C.:
[tex]\boxed{\mathsf{P.C.=43+856.576}}[/tex]
b.) Station of P.C.C.:
[tex]\boxed{\mathsf{P.C.C.=44+90.076}}[/tex]
c.) Station of P.T.:
[tex]\boxed{\mathsf{P.T.=44+188.049}}[/tex]
25. A 3 m curved strip around and above the base of hemispherical dome is to be covered with one coat of water proofing compound. radius of dome is 7.5 m. if the dome is cut off at the upper portion at the 3 m curve strip around and above the base of the hemispherical dome, compute the volume of the remaining portion after the upper portion is removed.
⠛⠛⣿⣿⣿⣿⣿⡷⢶⣦⣶⣶⣤⣤⣤⣀⠀⠀⠀ ⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡀⠀ ⠀⠀⠀⠉⠉⠉⠙⠻⣿⣿⠿⠿⠛⠛⠛⠻⣿⣿⣇⠀ ⠀⠀⢤⣀⣀⣀⠀⠀⢸⣷⡄⠀⣁⣀⣤⣴⣿⣿⣿⣆ ⠀⠀⠀⠀⠹⠏⠀⠀⠀⣿⣧⠀⠹⣿⣿⣿⣿⣿⡿⣿ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠛⠿⠇⢀⣼⣿⣿⠛⢯⡿⡟ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠦⠴⢿⢿⣿⡿⠷⠀⣿⠀ ⠀⠀⠀⠀⠀⠀⠀⠙⣷⣶⣶⣤⣤⣤⣤⣤⣶⣦⠃⠀ ⠀⠀⠀⠀⠀⠀⠀⢐⣿⣾⣿⣿⣿⣿⣿⣿⣿⣿⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠈⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠙⠻⢿⣿⣿⣿⣿⠟
SORRY! YOU ARE NOW IN TROUBLE
YOU ARE NOW A VICTIM OF STEALING PRECIOUS PONTS!
NOW BAN ME OR I WILL CONTINUE TO SP4M OTHERS
26. Activity 5: How can you use me? Directions: Give an example of the organic compound as stated in the following activities. Example of Organic Compound Activities 1. Eating "Grow" foods like meat and beans for proteins. 2. Bending a plastic tube so it can fit into a curved path 3. Washing dirty clothes with detergents 4. Using liquefied petroleum gas (LPG) to cook food 5. Acting cell membrane around an animal cell.
1.Proteins,Carbohydrates,Lipids and Nucleic Acids
Wala pa po Yung iba
27. The compound microscope is classified into three main parts: Mechanical, Illuminating and Magnifying. The mechanical part comprises of _______ which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the ______ brings the specimen into sharp focus. In addition, the stage and stage clips _______ and holds the specimen in place. Further, _______ provides ______ to the compound microscope while the _______ is curved shape used for holding the compound microscope when transporting. The _____ supports the compound microscope when it is in inclined position. The illuminating part consists of the ______ which allows light to pass through the diaphragm and that ______ the amount of light. Further, the magnifying part comprises of the _____ which is a lens that attaches to a body tube. The specimens are magnified by the ______ which are classified into Scanner, low power objective, high power objective and oil immersion.
Answer:
1. Body tube
2. Fine adjustment knob
3. Secure
4. Base
5. Arm
6. Inclination joint
7. Mirror
8. Adjust
9. Objectives
10. Ocular/ eyepiece
28. The compound microscope is classified into three main parts: Mechanical, Illuminating and Magnifying. The mechanical part comprises of _______ which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the ______ brings the specimen into sharp focus. In addition, the stage and stage clips _______ and holds the specimen in place. Further, _______ provides ______ to the compound microscope while the _______ is curved shape used for holding the compound microscope when transporting. The _____ supports the compound microscope when it is in inclined position. The illuminating part consists of the ______ which allows light to pass through the diaphragm and that ______ the amount of light. Further, the magnifying part comprises of the _____ which is a lens that attaches to a body tube. The specimens are magnified by the ______ which are classified into Scanner, low power objective, high power objective and oil immersion.
#BrainlyFast
The compound microscope is classified into three main parts: Mechanical, Illuminating and Magnifying. The mechanical part comprises _____Body tube___ which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the Fine Adjustment Knob brings the specimen into sharp focus. In addition, the stage and stage clips _____Secure____ and holds the specimen in place. Further, ____Base____ provides stability to the compound microscope while the ____arm____ is curved shape used for holding the compound microscope when transporting. The ___Inclination Joint__ supports the compound microscope when it is in incline position. The illuminating parts consist of the ___Mirror___ which allows light to pass through the diaphragm and that ____Adjust____ the amount of light. Further, the magnifying parts comprises the ____objectives____ which is a lens that attaches to a body tube. The specimens are magnified by the ____ocular/eye piece_____ which are classified into scanner, low power objective, high power objective and oil immersion.
Kindly visit the link below:
brainly.ph/question/8814292
29. The compound microscope is classified into three main parts: Mechanical, Illuminating and Magnifying. The mechanical part comprises _______ (1) ________ which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the ______ (2) _________ brings the specimen into sharp focus. In addition, the stage and stage clips _____ (3) ________ and holds the specimen in place. Further, _____ (4) _______ provides stability to the compound microscope while the _____ (5) _____ is curved shape used for holding the compound microscope when transporting. The _____ (6) _____ supports the compound microscope when it is in incline position. The illuminating parts consist of the _______ (7) ______ which allows light to pass through the diaphragm and that _____ (8) ________ the amount of light. Further, the magnifying parts comprises the _______ (9) _________ which is a lens that attaches to a body tube. The specimens are magnified by the _____ (10) _______ which are classified into scanner, low power objective, high power objective and oil immersion
#BrainlyFast
The compound microscope is classified into three main parts: Mechanical, Illuminating and Magnifying. The mechanical part comprises _____Body tube___ which holds the objectives and revolving nosepiece in place. The coarse adjustment knob allows the movement of the tube upward or downward. On the other hand, the Fine Adjustment Knob brings the specimen into sharp focus. In addition, the stage and stage clips _____Secure____ and holds the specimen in place. Further, ____Base____ provides stability to the compound microscope while the ____arm____ is curved shape used for holding the compound microscope when transporting. The ___Inclination Joint__ supports the compound microscope when it is in incline position. The illuminating parts consist of the ___Mirror___ which allows light to pass through the diaphragm and that ____Adjust____ the amount of light. Further, the magnifying parts comprises the ____Objectives____ which is a lens that attaches to a body tube. The specimens are magnified by the ____ocular/eye piece_____ which are classified into scanner, low power objective, high power objective and oil immersion.
Kindly visit the link below:
brainly.ph/question/8814292
30. complete each compound sentence with another independent clause or simple sentence to show cause-effect relationship.1.study hard,so __________2.limit the use of the table,or __________3.always be honest and truthful in words and action,________4.learn how to curve or sculpt and _________5.mara has toured many countries,yet _____________6.mother is at the market so _________________7.the boy is crying because __________________8.mariz has a terrible toothache so _____________9.let's clean the house so that ___________________10.mother got angry because ___________________
Answer:
So i can make my parents proud
